Extreme Wood Stain

Defy Extreme Wood Stain is a  wood stain formulated using state of the art Nano-Technology to create a level of durability that has simply not been available in a clear wood stain finish in the past.

Extreme Wood Stain is the newest member of the DEFY line of wood products and is our most innovative high performance product yet. Ultra violet rays cause wood to turn gray and become susceptible to water penetration and decay. DEFY Extreme Wood Stain effectively protects the wood from the harmful effects of the sun and protects wood from graying using state of the art nano-technology.

Extreme Wood Stain contains zinc oxide particles that reflect the damaging Ultraviolet Rays from the sun. When you reduce the size of these zinc particles down to the nano level, they become invisible to the naked eye. These nano-particles are distributed at a rate of over 30 trillion per square inch of surface area to provide protection from the sun in much the same way as they do when used in sun blockers and sunscreen lotions. This results in a "Crystal Clear" finish that when dry, will give the longest lasting UV protection on the market for a clear deck finish!

Not only will this help with prolonging the graying, but the nano-particles are highly resistant to mold and mildew, enabling you to retain the natural color.

This VOC compliant crystal clear stain provides UV protection without adding a tint or changing the look of your wood which means that you can keep your wood deck naturally beautiful for longer.

DEFY Extreme Wood Stain Uses

Defy Extreme Wood Stain is designed to be used on interior or exterior wood surfaces including: wood siding, log homes, decks, fences, shake shingles, outdoor wood furniture, pressure treated lumber, and all other natural wood surfaces. Application of Extreme Wood Stain is easy! A treatment of Defy Wood Cleaner will generally clean and restore previously treated surfaces to their original appearance. Once cleaned, a quick application of DEFY Wood Brightener will brighten the wood and restore the wood’s natural beauty. This deck sealer will provide long-term beauty and protect the natural appearance of your wood. The surface should be recoated annually or when graying initially starts to appear.

Note: PREPARATION BEFORE APPLYING CLEAR WOOD STAIN To insure your satisfaction with this product, it is highly recommended that you use both Defy Wood Cleaner and Defy Wood Brightener, per label instructions, to prepare any weathered wood for staining. Use of alternative products or methods, prior to sealing, may result in unsatisfactory final results. DEFY Extreme Clear Wood Stain goes on milky white and dries to a clear, flat finish with little to no change to the natural look of your wood. It is sold in 1 and 5 gallon containers and covers 100-150 square feet per gallon depending on wood texture and porosity.

Easy Deck Care Maintenance

Periodically, as the surface begins to get dirty or dull, simply wash it down with a mild detergent and water. As the weather begins to wear away at the surface, a maintenance coat will need to be applied. To check the surface to see if it's ready for a maintenance coat, simply sprinkle a little water on it. If the water is immediately absorbed into the wood, then it is ready to be recoated.

The first step in the maintenance process is to apply a coat of Wood Brightener. This will lighten any minor graying and clean the surface. Allow the surface to dry 24 hours followed by a single coat application of Extreme Wood Stain as directed on the label.