Usage:
Plywood joints, concrete construction joints, concrete cracks, and
joints between metal, fiberglass or insulation, and combinations of
the above substrates in roof, deck and wall specifications. The
Gaco DeckTape can also be used for flashing at changes of plane;
however, installation into inside corners requires special
care.
Color:
White
APPLIED
PRODUCT DATA
Tensile:
ASTM D-412-68:
- 400 psi (2.76
MPa) Transverse
- 800 psi (5.52
MPa) Longitudinal
Elongation:
ASTM D-412-68, 60%
Adhesion:
ASTM D-903-49, Same as that of Primer used.
Solvent
Swell:
None measurable.
Heat
Shrinkage:
None after 6 months at 150°F (66°C).
PACKAGED
PRODUCT DATA
Packaging:
4 inches wide, 120 feet per roll.
Thickness:
5 Mils (.127mm)
Storage:
Store in a cool, dry place.
APPLICATION
- To begin
taping, brush on a 5-6” wide stripe of GacoDeck coating, centering
the stripe over joints or cracks. Work in small sections, as Latex
coatings dry quickly.
- While coating
is still wet, embed polyester tape smoothly into the coating. Brush
another layer of coating over the tape, smoothing out any
wrinkles.
- Allow the
surface to dry. For a seamless finish, lightly sand the edges of
the coated tape with medium grit sandpaper before applying the
first coat of GacoDeck.
CUSTOMER REVIEWS
There are currently no reviews of this
product.
Submit a Review
