VULKEM 116

Basic Uses:

Vulkem® 116 is an excellent general purpose sealant designed for use in precast, masonry, window frame perimeters and similar types of construction joints. Vulkem 116 is suitable for continual immersion in water. Vulkem 116 is designed for exterior and interior use.

Limitations:

• Do not apply over damp or contaminated surfaces.
• Use with adequate ventilation.

Surface Preparation:

For good adhesion, the joint interface must be sound, clean and dry. Depending on the substrates, or presence of form release agents, masonry waterproofings, dust, loose mortar or laitance, architectural paints or finishes, the joint surfac may require a thorough wire bushing, grinding, sandblasting, solvent washing and/or primer.

Tooling & Cleaning:

Tooling is recommended immediately after application to insure firm, intimate contact with joint interface. Dry tooling is preferred. Excess sealant and smears adjacent to the joint can be carefully removed with Xylol or Toluol before sealant cures.

http://www.tremcosealants.com/fileshare/msds/426805_323_U.pdf

http://www.tremcosealants.com/fileshare/instructions/sealantsai.pdf

• Open Link in New Tab
• Download