Select a Category

Brands

Benjamin Moore Products

GE Enduris Roof Coating 100% Silicone Alkoxy

SureCrete Design Products

Rust-oleum

SaverSystems

Defy Wood Stain and Finishes

Marine Seal Products

MasonrySaver Water Repellents

MasonrySaver Decorative Concrete Products

Professional Masonry Products

All Products

Smith Paints

Chemcraft

Gaco Roof & Deck -

Brickform Stains, Dyes and Sealers

Simiron

Infiniti Roof Coatings

Featured

All Products

Accessories

Decorative Floor

Paint

Primer

Roof Products Coatings & Sealers

Sealant

Specialty Coating

Stain

Water Repellent

All Products

All orders will be processed within 2 to 3 business days.

Navigate:

StoreFront / Brands / SureCrete Design Products / Commercial Grade High Gloss Floor Polyurethane Solvent Based DK400™

<		Previous Product
		Next Product		>

Commercial Grade High Gloss Floor Polyurethane Solvent Based DK400™

SureCrete’s DK400 is a commercial grade high gloss floor polyurethane solvent based for heavy-duty high traffic interior floor topcoat.

Sheen:

Price: $129.99

Ship To:

SKU:	DK 400-1
Surface:	Concrete & Masonry

DescriptionCustomer ReviewsHow to Apply Dura-Kote High Gloss Clear Floor Polyurethane Commercial Grade Interior Coating:Specifications and Properties of Dura-Kote Clear Water-Based Polyurethane:

High Gloss Floor Polyurethane Solvent-Based DK400 by SureCrete

Dura-Kote solvent-based clear high gloss floor polyurethane is a 2 component 51% solids, acrylic aliphatic polyurethane designed as a non-yellowing clear coating for interior concrete, concrete overlays, or as a clear top finish coat on epoxy systems. The high-gloss clear top coat generates the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable.

When dealing with protective coatings for concrete, which sealer you choose can vary wildly based upon the arena that the sealer is going to be applied in, the different chemicals it will be exposed to, as well as the amount of foot traffic or abrasion it will endure. In the case of choosing a sealer for an interior concrete application or overlay, there are few coatings that offer the balance of cost-efficiency and resilience as solvent polyurethane sealers. Dura-Kote Polyurethane solvent based clear topcoat has been formulated to be one of the most mechanically and chemically resistant coatings available on the market today.

There are currently no reviews of this product.
Submit a Review

Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants, and fully profiled and etched.
Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and relative humidity to stay below 75%.
Pour 1 part "B" into four parts "A" in a large mixing container (we pre-measured the kits to make it easy on you!)and mix mechanically for a minimum of 2 minutes.
Use a premium, de-fuzzed, phenolic core roller to roll out thin coats over working area, making sure to maintain wet edges and backroll the entire surface.
Two coats are suggested with any interior project receiving a polyurethane coating, with the second coat being applied as soon as the first coat can be walked on, and is used in the same manner as the first layer.
While not necessarily required, we suggest the use of a sacrificial wax coating to extend the life of the floor and add a measure of slip resistance.

Coverage	Approx 300-400 square foot per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating	less than 435 g/L
Solids Content	51%
Pot Life	approx 60 minutes
Shelf Life	1 year in original unopened container
Ready for recoat	6-8 hours (18+ hours at low temperatures)
Light Duty Use	24 hours (Up to 48 hours at low temperatures)
Heavy Traffic Ready	3 days (Up to 5 days at low temperatures)
Full Cure	5-7 days (Up to 14 days at low temperatures)
Appearance (cured)	Clear Gloss
Appearance (wet)	Clear
Water Resistance	Excellent, beads water
Mechanical Stability	Excellent
Light Stability	Excellent
Mechanical Properties	Direct Impact - 30 inch/pounds; Reverse Impact - 6 inch/pounds
Hardness	Pencil 4H, Konig 100
Diluent	Hydrocarbons
Odor	Solvent
Application Temperature	50 - 90 degrees Fahrenheit

•

We apologize in advance as some shipping may be delayed.
Please plan accordingly. Thank you.

(800) 457-1332

office@duvalpaint.com

Returning Customer?

Shopping Cart

The Shopping Cart is currently empty

Redeem Gift Certificate

eCommerce Software by TrueCommerce

All orders will be processed within 2 to 3 business days.

Commercial Grade High Gloss Floor Polyurethane Solvent Based DK400™

We apologize in advance as some shipping may be delayed.
Please plan accordingly. Thank you.

Resources

Social

Contact Us

Newsletter

All orders will be processed within 2 to 3 business days.

Commercial Grade High Gloss Floor Polyurethane Solvent Based DK400™

We apologize in advance as some shipping may be delayed. Please plan accordingly. Thank you.

Resources

Social

Contact Us

Newsletter

We apologize in advance as some shipping may be delayed.
Please plan accordingly. Thank you.